+971506584313

Mercer Valve

Mercer Valve

Product form

Product form

8100 SERIES,

 

8100 Series is state of the art when it comes to a soft seat and high flow rate design. It is an industry leader in pressure relief devices with a reputation for safety and reliability, low maintenance, and cost effectiveness. Our soft seat and fully guided disk design outlasts the competition and produces a valve that has consistent set pressures and a field proven tight lip seal. A tighter seal reduces leaks and limits product loss which leads to increased productivity and safety. The 8100 Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped applications for Air/Gas and Liquid service. The 8100 Series is designed for applications ranging from 15 psi up to 2000 psi. With its non-rising stem and smaller frame this valve is perfect for all those tight spaces and anywhere else you need a safe and reliable valve.

 

Reference:

 

9100 SERIES | THREADED

 

9100 Threaded Series is state of the art when it comes to a soft seat and high flow rate design. It is an industry leader in pressure relief devices with a reputation for safety and reliability, low maintenance, and cost effectiveness. Our soft seat and fully guided disk design outlasts the competition and produces a valve that has consistent set pressures and a field proven tight lip seal. A tighter seal reduces leaks and limits product loss which leads to increased productivity and safety. The 9100 Threaded Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped applications. This valve is well suited for specialty gases, compressors, separators, gathering lines and anywhere else you need a safe and reliable valve. With a service range of 10 psig to 3500 psig and a wide array of options and applications, our 9100 Threaded Series is a valve that you trust.

 

Features:

 

  • Designed with “Auto Seat Technology”®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical Stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stems allowing valves to be installed in small areas.

 

Reference:

 

9100 SERIES | FLANGED

 

Like the 9100 Threaded series, 9100 Flanged Series is also state of the art when it comes to a soft seat and high flow rate design. It is an industry leader in pressure relief devices with a reputation for safety and reliability, low maintenance, and cost effectiveness. Our soft seat and fully guided disk design outlasts the competition and produces a valve that has consistent set pressures and a field proven tight lip seal. A tighter seal reduces leaks and limits product loss which leads to increased productivity and safety. The 9100 Flanged Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped application for Air/Gas and Liquid service. This valve is well suited for specialty gases, compressors, separators, gathering lines and anywhere else you need a safe and reliable valve. With a service range of 10 psi to 3500 psi and a wide array of options and applications, our 9100 Flanged Series is a valve that you trust.

 

Features:

 

  • Designed with “Auto Seat Technology”®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical Stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stems allowing valves to be installed in small areas.

 

Reference:

 

9500 SERIES | SNAP PILOT

 

9500 Snap Pilot Series is designed to pop open in response to pressure pickup at the inlet of the main valve. Our snap pilots have an adjustable blowdown that alters the set spring deflection once the valve has popped and the greater the deflection, the shorter the blowdown. Our 9500 Snap Pilot is based on proven control design principals, featuring our “Auto Seat Technology”®. The 9500 Snap Pilot Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped applications for Air/Gas service. When you need to regulate system pressures and maintain overall quality, you need a safe and reliable valve. With a service range of 15 psi to 4500 psi and a wide array of options and applications, our 9500 Snap Pilot Series is a valve that you trust.

 

Features:

 

  • Designed with “Auto Seat Technology”®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Non-rising stems allowing valves to be installed in small areas.
  • Pilot Valve options include: Backflow Preventer, Pressure Snubber and Auxiliary Filter.
  • Snap Pilot Valve options include: Field Test Connection, Test Gag, and Manual or Remote Blowdown.

 

Reference:

 

9500 SERIES | GAS MODULATING PILOT

 

9500 Gas Modulating Series is designed to gradually open the main valve in response to system overpressure. Modulating pilots produce far less shock on a system and provide considerable resistance to wear and tear on the main valve components. Our 9500 Gas Modulating Pilot is based on proven control design principals, featuring our “Auto Seat Technology”®. The 9500 Gas Modulating Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped applications for Air/Gas service. You need a safe and reliable valve when it comes to regulating system pressures and maintaining overall quality. With a service range of 15 psi to 4500 psi and a wide array of options and applications, our 9500 Gas Modulating Pilot Series is the valve you can trust.

 

Features:

 

  • Designed with “Auto Seat Technology”®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Non-rising stems allowing valves to be installed in small areas.
  • Pilot Valve options include: Backflow Preventer, Pressure Snubber and Auxiliary Filter.
  • Modulating Pilot Valve options include: Field Test Connection, Test Gag, and Manual or Remote Blowdown.

 

Reference:

 

1400 SERIES

 

1400 Series is state of the art when it comes to a soft seat and high flow rate design. It is an industry leader in pressure relief devices with a reputation for safety and reliability, low maintenance, and cost effectiveness. Our soft seat and fully guided disk design outlasts the competition and produces a valve that has consistent set pressures. A tighter seal reduces leaks and limits product loss which leads to increased productivity and safety. The 1400 Series valve is manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section XIII UV stamped applications for Air/Gas service. The 1400 Series is designed for applications ranging from 150 psi up to 6000 psi. With its non-rising stem and smaller frame this valve is perfect for all those tight spaces and anywhere else you need a safe and reliable valve.

 

Features:

 

  • Designed with features of “Auto Seat Technology”®
  • A low rated and fully guided spring allows for more consistent Set Pressures from pop to pop.
  • Consistent Set Pressures allows for repeatable use without the need for excessive repairs or resetting.
  • Open, Close, Seat and Seal™
  • Fully guided disk for the proper alignment, opening and closing, and reseating of the valve.
  • Mechanical stop prevents wear on parts and controls valve lift.
  • Pop Action relief allows the valve to go to full lift at Set Pressure. This helps with DOT regulated applications.
  • Non-rising stem allows valves to be installed in small spaces.

 

Reference: