GORMAN-RUPP
Gorman-Rupp VG Series centrifugal pumps are engineered for maximum operating efficiency and minimal energy consumption when pumping clear liquids. The enclosed impeller design incorporates double curvature vanes for higher efficiency. The entrance of the volute casing has dynamic positioning vanes that direct the flow to the impeller for increased efficiency while reducing net positive suction head (NPSH). Impeller trims can provide maximum flexibility for your specific application.
Size | 1-1/4″ (30 mm), 1-1/2″ (40 mm), 2″ (50 mm), 2-1/2″ (60 mm), 3″ (80 mm), 4″ (100 mm), 5″ (125 mm), 6″ (150 mm), 8″ (200 mm) |
Max Capacity | 4900 GPM (309 lps) |
Max Head | 500′ (152 m) |
Max Solids | 1-3/8″ (35 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Cast Iron |
Gorman-Rupp VGH Series centrifugal pumps are engineered for maximum operating efficiency and minimal energy consumption when pumping dirty liquids and mild abrasives. The enclosed impeller design incorporates double curvature vanes for higher efficiency. The entrance of the volute casing has dynamic positioning vanes that direct the flow to the impeller for increased efficiency while reducing net positive suction head (NPSH). Impeller trims can provide maximum flexibility for your specific application.
Size | 1-1/4″ (30 mm), 1-1/2″ (40 mm), 2″ (50 mm), 3″ (80 mm), 4″ (100 mm), 6″ (150 mm), 8″ (200 mm) |
Max Capacity | 4900 GPM (309 lps) |
Max Head | 500′ (152 m) |
Max Solids | 1-3/8″ (35 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Cast Iron, Ductile Iron |
Gorman-Rupp 60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%). Discharge on many models can be placed in any position by turning the pump casing.
Size | 2″ (50 mm), 2-1/2″ (60 mm), 3″ (80 mm), 4″ (100 mm), 5″ (125 mm), 6″ (150 mm), 8″ (200 mm), 10″ (250 mm), 12″ (300 mm) |
Max Capacity | 6800 GPM (429 lps) |
Max Head | 500′ (152 m) |
Max Solids | 3″ (76 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Cast Iron, Cast Steel, Ductile Iron |
Gorman-Rupp 80 Series® medium head, mild solids-handling, self-priming centrifugal pumps are designed for non-stop work loads.
The straight-in-suction design of these high efficiency pumps guarantees quick positive priming and allows them to operate at higher suction levels than most other self-priming centrifugal pumps.
The liquid being pumped enters directly into the eye of the impeller, and a suction check valve prevents in-line return flow when the pump is shut off. And, because they have few moving parts, 80 Series pumps are easy to maintain and service, saving money in the long run.
80 Series self-priming centrifugal pumps are available in a variety of configurations for all of your industrial, construction, mining, agricultural, municipal and petroleum fluid handling needs.
Size | 1-1/4″ (30 mm), 1-1/2″ (40 mm), 2″ (50 mm), 3″ (80 mm), 4″ (100 mm), 6″ (150 mm), 8″ (200 mm), 10″ (250 mm) |
Max Capacity | 2800 GPM (177 lps) |
Max Head | 205′ (62 m) |
Max Solids | 2-1/2″ (64 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Cast Iron, Ductile Iron, Stainless Stee |
Whether bypassing a pump station during repair, keeping critical services operational at a plant, or helping a construction crew finish on time, Gorman-Rupp’s Super T Series® portable engine-driven pumps keep the liquid flowing. Gorman-Rupp’s Super T Series self-priming centrifugal pumps are designed to reprime automatically in a completely open system – without a need for suction or discharge check valves (an optional discharge check and air release valve is only required when pumping against a pressurized system). Additionally, there is no need for add-on vacuum pumps or compressors, which add to owner maintenance and increase the potential for costly repairs.
Size | 4″ (100 mm), 6″ (150 mm), 8″ (200 mm), 10″ (250 mm) |
Max Capacity | 3500 GPM (221 lps) |
Max Head | 140′ (43 m) |
Max Solids | 3″ (76 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Cast Iron |
Horsepower | 57 HP – 148 HP |
The Efficient Petroleum Tank Cleaning Method
Gorman-Rupp’s TankleenorTM provides quick, efficient and economical cleaning of petroleum storage tanks. The unit is a lightweight, wheelmounted cleaning system designed for one-man operation and is easily moved from job to job.
Even when tanks are thought to be free of moisture and foreign debris, they often contain enough water and other contaminants to degrade the stored product. The Gorman-Rupp TankleenorTM can remove contaminants including gel precipitates, microbial growths, rust and water, without disturbing the product or taking the tank out of service.
Operating liquid drawn from the contaminant tank circulates through the pump and creates a vacuum at the eductor. The vacuum draws moisture and contaminants through the cleanout hose and back to the eductor, where it mixes with the operating liquid and is carried to the contaminant tank.
The safest way to handle a hazardous pumping operation is to use a pump that is designed for the job. That’s why Shield-A-Spark pumps by Gorman-Rupp feature a spark and splash shielded engine, muffler and fuel cap.
Four Shield-A-Spark models are available in 2” and 3” discharge sizes and are capable of delivering up to 395 gpm and heads up to 140′.
The gasoline engine unit features a dependable, rugged military or aircraft type spark plug which is radio suppressed and prevents spark gap jumping. A shielded ignition wire provides an enclosed path for high tension spark. The sealed toggle ignition switch is safe and spark free, and the spark-arresting muffler is designed to retard both sparks and flames.
Gasoline and diesel models are available that include non-combustible air filters and long-life valves.
Size | 2″ (50 mm), 3″ (80 mm) |
Max Capacity | 395 GPM (25 lps) |
Max Head | 140′ (43 m) |
Max Solids | 0-3/4″ (19 mm) |
Max Temperature | 160 F (71 C) |
Materials of Construction | Aluminum, Cast Iron |
Horsepower | 3 HP – 9 HP |